AMETEK SGA Series - Manual (Page 74)

Operation Sorensen SGA Series
3-24 M550129-01 Rev AG
25
14 ISO TTL/CMOS
1
ISO RTN 2
Figure 3-20. Remote Output ON/OFF Using Isolated TTL/CMOS Source
3.8.3 REMOTE SHUTDOWN (S/D)
A remote +12 VDC voltage can be connected externally between Pin J1-18
(S/D Fault) and Pin J1-24 (COM) to disable, i.e., shut down the output of the
power supply; see Figure 3-21. A low-level, or opening the +12 VDC signal,
will allow the unit to revert to normal operation.
Figure 3-21. Remote Shutdown Using DC Voltage Source