AMETEK SGA Series - Manual (Page 23)

Sorensen SGA Series Installation
M550129-01 Rev AG 2-3
2.3.1 RACK MOUNTING
The SGA Series models are designed for mounting in a standard 19-inch
equipment rack compliant to EIA-310. If additional instrumentation is mounted
in the rack, no additional clearance is required above or below the SGA
Series units.
Support the SGA Series unit using appropriate L-brackets or rack mount
slides; suggested slide kits are listed as follows:
Rack Mount Slide Kit (Option):
3U models, 4 –15 kW: AMETEK part number K550212-01
6U models, 20
–30 kW: AMETEK part number K550213-01