AMETEK SGA Series - Manual (Page 21)

M550129-01 Rev AG 2-1
SECTION 2
INSTALLATION
2.1
INSPECTION
Inspect the shipping carton for possible damage before unpacking the unit.
Carefully unpack the equipment. Save all packing materials until inspection is
complete. Verify that all items listed on the packing slips have been received.
Visually inspect all exterior surfaces for broken knobs, connectors, or meters.
Inspect for dented or damaged exterior surfaces. External damage may be an
indication of internal damage. If any damage is evident, immediately contact
the carrier that delivered the unit and submit a damage report. Failure to do
so could invalidate future claims. Direct repair issues to Customer Service at
858-458-0223 (local) or 1-800-733-5427(toll free).
2.2
CONTENTS OF SHIPMENT
Depending on the model, configuration, and options available for your SGA
Series power supply, the ship kit may include additional parts and
accessories.
Minimum items included in the ship kit:
 AMETEK manuals CD-ROM (P/N M550008-01) containing the SGA Series
DC Power Supplies Operation Manual (this manual, P/N M550129-01) and
the SG manual for the digital interface options, IEEE 488.2/RS232 and
Ethernet Programming Manual (P/N M550129-03).
 Sense mating connector:
10V-800V models, (Molex P/N 39-01-4031) with loose contacts (Molex
P/N 39-00-0182).
1000V model, (Molex P/N 39-01-4041) with loose contacts (Molex
P/N 39-01-0182).
 J1 mating connector (Cinch P/N DB25P or equivalent); shipped
attached to rear panel connector, J1.
 Backshell for J1 (DB25) mating connector (Cinch P/N DCH-B-001, or
equivalent).