AGI Security SYS-16HN44P - Manual (Page 95)

83
3.3.5 NVR44/44-8P/44-16P/74/74-8P/74-16P/ Series
The following figures are based on the NVR74 series.
① Use the screwdriver to loose the screws of the rear panel and then remove the front cover.
4. Turn the device upside down
and then turn the screws in
firmly.
in the chassis.
5. Fix the HDD firmly. 6. Connect the HDD cable and
power cable.
7. Put the cover in accordance
with the clip and then place the
upper cover back.
8. Secure the screws in the rear
panel and the side panel.