AGI Security SYS-16HN44P - Manual (Page 43)

31
Icon Name Function
NET
Network status
indicator light
The red light becomes on when the network
connection is abnormal.
PWR
Power indicator
light
The red light becomes on when the power
connection is OK.
HDD
HDD status
indictor light
The red light becomes on when HDD is abnormal.
IR
Remote control
receiver
It is to receive signal from the remote control.
2.1.3 NVR41-8P Series
The front panel is shown as below. See Figure 2-3.
Figure 2-3
Please refer to the following sheet for detailed information.
SN Name Function
1
Network status indicator
light
The red light becomes on when the network
connection is abnormal.
2 Power indicator light
The red light becomes on when the power
connection is OK.
3 HDD status indictor light The red light becomes on when HDD is abnormal.
4 USB USB port
2.1.4 NVR42/42-P/42-8P/72/72-8P Series
The front panel is shown as below. See Figure 2-4.
Figure 2-4
Please refer to the following sheet for front panel button information.
Name Icon Function
Power button
Power button, press this button for three seconds to boot up
or shut down NVR.