1 ptz function setup, Ptz function setup – AGI Security SYS-16HN44P User Manual
Page 144

132
Figure 4-41
Please refer to the following sheet for detailed information.
Please note the above interface may vary due to different protocols. The button is grey and can not
be selected once the current function is null.
Right click mouse or click the ESC button at the front panel to go back to the Figure 4-39.
Icon
Function
Icon
Function
Preset
Flip
Tour
Reset
Pattern
Aux
Scan
Aux
on-off
button
Rotate
Go to menu
4.7.2.1 PTZ Function Setup
Click
, you can go to the following interface to set preset, tour, pattern, and scan. See Figure 4-42.
Figure 4-42
Preset Setup
In Figure 4-42, click preset button and use eight direction arrows to adjust camera to the proper position.
This manual is related to the following products: