AGI Security SYS-16HN44P - Manual (Page 52)

40
Status indicator
light
Status The light is on if device operates properly.
Power indicator
light
POWER Power indicator light
Record light 1-16 It becomes on when system is recording.
HDD abnormal
status indictor
light
HDD
It becomes on when there is no HDD, HDD error occurs, or
HDD is full.
2.1.9 NVR70/70-R Series
The front panel is shown as in Figure 2-9.
Figure 2-9
Please refer to the following sheet for front panel button information.
SN Name Icon Function
1
Power button Press it once to turn on the device.
Press it for a long time to turn off the device (Usually
we do not recommend).
Press power button for a long time or pull out the
power cable may result in device auto restart.
2
System HDD
Indicator light
The blue light flashes when system is reading or
writing the system HDD.
In the system HDD, there are device important
configuration file, factory default configuration file,
device initial boot up data.
3
Alarm indicator light The alarm indicator light becomes on once an alarm
occurred. It becomes on via the software detection.
The alarm includes local alarm, no disk and etc.
4
Network indicator
light
The network indicator light is blue and it flashes
when you connect the device to the network.