AGI Security SYS-16HN44P - Manual (Page 81)

69
Port Name Function
+12V / +12V power output port. It can provide the power to
some peripheral devices such as the camera or the
alarm device. Please note the supplying power
shall be below 1A.
Network port 10M/100M/1000Mbps self-adaptive Ethernet port.
Connect to the network cable.
eSATA eSATA port External SATA port. It can connect to the device of
the SATA port. Please jump the HDD when there is
peripheral connected HDD.
USB2.0 port USB2.0 port. Connect to mouse, USB storage
device, USB burner and etc.
RS-232 RS232 debug
COM.
It is for general COM debug to configure IP address
or transfer transparent COM data.
HDMI
High Definition
Media Interface
High definition audio and video signal output port. It
transmits uncompressed high definition video and
multiple-channel data to the HDMI port of the
display device. HDMI version is 1.3. The two HDMI
ports to output video from different video sources.
VGA
VGA video output
port
VGA video output port. Output analog video signal.
It can connect to the monitor to view analog video.
2.2.17 NVR70 Series
The NVR70 series rear panel is shown as below. See Figure 2-41.
Figure 2-41
Please refer to the following sheet for detailed information.
Port Name Function
Power switch / Power on-off button
Power input
port
/ Input AC 100~240V.