AGI Security SYS-16HN44P - Manual (Page 49)

37
Fast play  Various fast speeds and normal playback.
Play previous | In playback mode, playback the previous video
Reverse/Pause  
In normal playback or pause mode, click this button to reverse
playback
In reverse playback, click this button to pause playback.
Play Next
|
In playback mode, playback the next video
In menu setup, go to down ward of the dropdown list.
Play/Pause

In normal playback click this button to pause playback
In pause mode, click this button to resume playback.
Window switch Mult Click it to switch one-window/multiple-window.
Shuttle(outer
ring)
In real-time monitor mode it works as left/right direction key.
Playback mode, counter clockwise to forward and clock wise to
backward.
Jog(inner dial)
Up/down direction key.
Playback mode, turn the inner dial to realized frame by frame
playback. (Only applies to some special versions.)
USB port To connect USB storage device, USB mouse.
Remote control
indicator light
ACT Remote control indicator light
Status indicator
light
Status If there is Fn indicator light , current status indicator light is null.
Power indicator
light
PWR Power indicator light
Channel indictor
light
1-32
For 4/8/16-channel series product.
The corresponding channel light becomes on when system is
recording.
For 32/64-channel series product:
When the light flashes slowly, it means the corresponding
channel of 1-16 channel is recording now (Such as channel 1).
When the light flashes fast, it means the corresponding channel
of 17-32 channel is recording now (Such as channel 17)
When the light becomes on, It means the corresponding 2
channels are recoding now (Such as channel 1 and channel 17.).
The channel indictor light here does not show the status of
the 33-64-channel.
IR Receiver IR It is to receive the signal from the remote control.