D-Link DI-1162M - Manual (Page 20)

DI-1162/DI-1162M Remote Access Router
14
Step 7 - Powering Up the DI-1162/DI-1162M
After all the devices are powered up, the DI-1162/DI-1162M can be turned ON. The router will perform a POST
(Power-On Self-Test). It is during this POST procedure that the PROM Configuration Menu can be accessed.
The router is now able to use the LAN and WAN ports.
The router must be further configured for managing your network. This can now be done by using the console, the
included Windows-based Configuration Utility, or Telnet.
For more information about configuring or managing the router, please refer to the next chapter, “Configuration
and Management.”