beautypg.com

System lan – D-Link DI-1162M User Manual

Page 110

background image

DI-1162/DI-1162M Remote Access Router

104

The parameters are described as follows:

IPX Net – This is the IPX network number.

Node Address – This is the node address of the device that the router will attempt to reach. The router will

check its routing table and try to locate the IPX Address.

Count – The number of pings (packets) that will be sent.

Delay (1 sec) – The amount of time in 1 second intervals between each ping in the Count.

Start Ping Test - Press or to begin the test.

System LAN

The System LAN test is used to diagnose the LAN port. It can only be run if the LAN port is disabled in the
Interface Configuration submenu.