Maintenance, 1 introduction, 2 periodic maintenance – Adept AnyFeeder User Manual
Page 49

Adept AnyFeeder User’s Guide, Rev. B
49
Maintenance
5
5.1
Introduction
This chapter describes:
• The periodic maintenance required for the Adept AnyFeeder
• The replacement procedure for the feed surface
• The adjustment procedure for the feed-deck height
5.2
Periodic Maintenance
shows the periodic (routine) maintenance tasks required for the Adept
AnyFeeder.
Table 1: Periodic Maintenance Tasks
Item
Description
Interval
Feed surface
Clean upper side of feed surface and
frame with a non-abrasive, no-residue
cleaner, such as rubbing alcohol or
window cleaner. Failure to do this may
degrade vision performance.
Weekly
Feed surface and
support
Remove feed surface and clean
bottom side with a non-abrasive,
no-residue cleaner, such as rubbing
alcohol or window cleaner.
Clean support surface and glass
window with alcohol.
Failure to do this may degrade vision
performance.
Monthly
Backlight
Remove side panel and clean upper
side of backlight.
Failure to do this may degrade vision
performance.
Quarterly
Servo valve
Check the two plastic silencers that
are screwed into the servo valve to
see if they are blocked with oil. If
needed, replace the silencers.
Failure to do this may degrade
AnyFeeder performance.
Annually