Changing the power supply plug – Zilog EZ80F91 User Manual
Page 57
eZ80F91 Development Kit
User Manual
UM014220-0508
eZ80F91 Module
52
eZ80Acclaim! Development Kit’s JP2 socket. When the module is
mounted correctly, it will overhang the edge of the eZ80Acclaim! Devel-
opment Kit by 10 pins.
Changing the Power Supply Plug
The universal 9 VDC power supply offers three different plug configura-
tions and a tool that aids in removing one plug configuration to insert
another, as shown in
.
Figure 16. 9 VDC Universal Power Supply Components
is for the 9 VDC power supply. The 6 VDC power supply
might look different.
Follow the steps below to exchange one plug configuration for another:
1.
Place the tip of the removal tool into the round hole at the top of the
current plug configuration.
2.
Press down to disengage the keeper tab and push the plug configura-
tion out of its slot.
3.
Select the plug configuration appropriate for your location, and insert
it into the slot formerly occupied by the previous plug configuration.
4.
Push the new plug configuration down until it snaps into place, as
indicated in
Note: