Memory, Figure 8, Female plug – Zilog EZ80F91AZA User Manual
Page 25
UM024402-0812
Memory
eZ80AcclaimPlus! Development Kit
User Manual
15
Memory
The eZ80AcclaimPlus! Development Board features the following memory configura-
tions:
•
8 KB on-chip SRAM
•
256 KB on-chip Flash
•
1 MB off-chip SRAM; U2 and U3 are accessible by chip selects CS1 and CS2
•
8 MB off-chip Flash: U11 is accessible by chip select CS0
To learn more about the operation of the eZ80F91 MCU’s internal memory, refer to the
1. The Board features two power source options. It can be powered by connecting Port
P3 (USB Mini-B) to the USB port of the development PC using the USB A to USB
mini-B cable included in the Kit. The other option is to connect a female plug to an
external 5 VDC source with at least 300–400mA of current to Port P2. A drawing of
an optional external power supply plug is shown in Figure 8.
When the Board is powered via a USB connection, communication with the development
PC can be established through the FT232RL chip (U8) to provide a USB-to-serial inter-
face. The UART0 block of the eZ80F91 MCU is connected to this chip.
An on-board USB port (U6) provides overcurrent protection in the event of a short or if a
device is connected to the Board that requires more than 500 mA @3.3 V. If either condi-
tion occurs, LED2 will illuminate.
Legend
A = 3.5 mm
B = 1.3 mm
C = 6 mm or longer
Figure 8. Female Plug