Figure 2, A successful usb-to-uart driver installation – Zilog EZ80F91AZA User Manual
Page 17
UM024402-0812
Installing the FTDI USB-to-UART Driver
eZ80AcclaimPlus! Development Kit
User Manual
7
32-bit OS detected
Installation driver
FTDI CDM driver installation process completed...
4. When the installation is complete, plug in the Mini-B connector of the second USB
cable into the Board, and the larger A connector into the USB port of your PC.
5.
If the driver installation was successful, the Ports (COM & LPT) section of the Device Man-
ager will display USB Serial Port (COMx) or similar message, as highlighted in Figure 2.
To launch the Device Manager on Windows 7 systems, launch the Start menu, enter device
manager in the Search programs and files field, and press the Enter key.
To open the Device manager on earlier Windows systems, navigate via the following path:
Start
→
Control Panel
→
System
→
Hardware
→
Device Manager
→
Ports (COM& LPT)
Figure 2. A Successful USB-to-UART Driver Installation
Note: