Zilog EZ80F91AZA - Manual (Page 13)

UM024402-0812 Kit Features
eZ80AcclaimPlus! Development Kit
User Manual
3
Kit Features
The key features of the eZ80AcclaimPlus! Development Kit are listed below.
•
eZ80AcclaimPlus! Development Board, which includes:
– eZ80F91 MCU operating at 50 MHz, with 256 KB of internal Flash memory and
8 KB of internal SRAM memory
– On-chip Ethernet Media Access Controller (EMAC)
– 8 MB of Flash memory
– Up to 1 MB of off-chip SRAM memory
– A USB interface that provides:
○ Power to the Board with overcurrent protection
○ Connection to the eZ80F91 MCU’s UART0 block

– DB9 connected to the eZ80F91 MCU’s UART1 block
– Optional external power connection
– Ethernet port and PHY
– Real-Time Clock support
– One 64-pin header with all available GPIO ports connected to it

•
USB Smart Cable
•
ZDS II Software and Documentation CD-ROM
Supported Operating Systems
The eZ80AcclaimPlus! Development Board supports the following operating systems:
•
Microsoft Windows 7 (32-bit/64-bit)
•
Microsoft Windows Vista (32-bit/64-bit)
•
Microsoft Windows XP
Installing the ZDS II Software and Documentation
Prior to connecting the eZ80AcclaimPlus! Development Board to your development PC,
locate the ZDS II CD-ROM in your eZ80AcclaimPlus! Development Kit, and observe the
following steps to install your ZDS II software and documentation.