Zilog Z8F1621 - Manual (Page 5)

In-Circuit Emulator
User Manual
2
UM016804-0208
Requirements
Table 1 lists the PC requirements for running ZDS II.
Install the Software
Follow these steps to install ZDS II with the ANSI C-Compiler.
1. Insert the ZDS II CD into your computer’s CD-ROM drive.
DemoShield launches automatically. If it does not automatically
launch, go to the root of the CD-ROM and double-click the file
launch.exe.
2. DemoShield provides several installation choices. Select “Install ZDS
II” to install now. You can install other software and accompanying
documentation later.
3. Follow the instructions on the screen to complete the installation.
Install the Hardware
The Z8 Encore! XP ® F64xx Series In-Circuit Emulator features an Ether-
net interface and an RS-232 serial port. Hardware installation consists of
Table 1. ZDS II System Requirements
Recommended Configuration Minimum Configuration
• PC running MS Windows XP, SP1
• Pentium III/500 MHz processor
• 128 MB RAM
• 40 MB hard disk space
• Super VGA video adapter
• CD-ROM drive
• Ethernet port
• One or more RS-232 communications ports
• Internet browser (Internet Explorer or
Netscape)
• PC running MS Windows 98SE/WinNT 4.0–
SP6/Win2000–SP3/WinXP–SP1
• Pentium II/233 MHz processor
• 96 MB RAM
• 25 MB hard disk space
• Super VGA video adapter
• CD-ROM drive
• Ethernet port
• One or more RS-232 communications ports
• Internet browser (Internet Explorer or
Netscape)