Zilog Z8F1621 - Manual (Page 24)

In-Circuit Emulator
User Manual
UM016804-0208
21
gles (changes state) or pulses, depending on what you specified for
Trigger Out.
How to Set Connector J11 Pin 3, External Trigger In
To use the Z8 Encore! XP
®
F64xx Series ICE external trigger in feature:
1. With the ICEDEMO project open in ZDS II as described in “Running
a Sample Project” on page 14, select Tools --> Trace and Event Sys-
tem.
2. In the Trace and Event System window, select an Event entry. In the
When section, check the Trigger In box.
3. In the Then section, set the parameters you want to use.
4. Click the OK button to set the trace and event system parameters.
When the external device you are using sets pin 3 of connector J11 to
3.3VDC, an event is generated in the ZDS II trace and event system.
Adapter Ordering Information
Use the following part numbers to order additional package adapters.
•
Z8F64210100ZDP, Z8 Encore! XP ® F64xx Series 40-pin PDIP ICE
Adapter
•
Z8F64210100ZDA, Z8 Encore! XP ® F64xx Series 44-pin LQFP ICE
Adapter
uses Adapters.com 110-72662-10
•
Z8F64210100ZDV, Z8 Encore! XP
®
F64xx Series 44-pin PLCC ICE
Adapter
•
Z8F64220100ZDA, Z8 Encore! XP
®
F64xx Series 64-pin LQFP ICE
Adapter
uses Adapters.com 110-7334-10