Zilog Z8F1621 User Manual
Page 10
In-Circuit Emulator
User Manual
UM016804-0208
7
F64xx Series ICE, you must either change the PC’s Ethernet settings to
match those of the Z8 Encore! XP
®
F64xx Series ICE or vice versa.
If using the PC in a stand-alone configuration, set the PC’s IP address to
192.168.1.21 and its subnet mask to 255.255.255.0. See “Changing the
PC’s Settings to Match the Z8 Encore! XP® F64xx Series ICE” on
page 7.
If working in a networked environment, set the Z8 Encore! XP
®
F64xx
Series ICE IP address and subnet mask to match the existing network
setup. See “Changing Z8 Encore! XP® F64xx Series ICE Settings to
Match the PC” on page 12.
Changing the PC’s Settings to Match the Z8 Encore! XP
®
F64xx Series ICE
After completing the following steps to change the PC’s Ethernet settings,
proceed to
The following instructions are for MS Windows XP. If your Win-
dows operating system is different, refer to your MS Windows OS
online help for details.
1. Open the Windows Control Panel and double-click the Network Con-
nections icon. The Network Connections dialog box appears (see
Figure 6
).
Note: