Zilog S3F8S19 - Manual (Page 31)

UM026801-0914 Run the S3F8S19 Monitor Demo
S3F8S19 Development Kit
User Manual
28
6. From the Build menu, select Set Active Configuration to open the Select Configura-
tion dialog box.
7. Select Debug , then click OK to close the Select Configuration dialog box.
8. From the Project menu in ZDS II, select Settings to open the Project Settings dialog
box. In the Project Settings dialog box, click the Debugger tab.
9. On the Debugger page, select S3FlashIsp from the Target list, then select
S3FlashIsp from the Debug Tool drop-down menu, as shown in Figure 31.
Figure 30. Select the S3F8S19_Mon_Demo.zdsproj Project