Xtramus NuTEA-551 V1.2 - Manual (Page 42)

42
SDFR Setting
You can choose the criteria with the check boxes. The SDFR parameters available here includes:
¾ DA: Destination MAC Address
¾ SA: Source MAC Address
¾ VID: VLAN ID ¾ DIP: Destination IP Address
¾ SIP: Source IP Address
¾ DPort: Destination Port ¾ SPort: Source Port
As mentioned above, each parameter is independent and can be activated in any combinations. To
activate the parameter (or combinations of parameters), please click the check box.
Rule Setting
The Rule Setting field allows you to set and input the value of DA, SA, VID, DIP, SIP, DPort and SPort.
The value of SDFR parameters can be set as Single, Pair, and Range. The following descriptions will us
DA as example.
¾ Single: A single value will be used as SDFR
parameter.
¾ Pair: Two values will be used as SDFR
parameters.
¾ Range: Values within the range of the two values
set here will be used as SDFR parameters.
Current Filter/Technical Terms
The Current Filter field displays the settings you’ve made, while the Technical Terms field displays the
explanations for DA, SA, VID, DIP, SIP, DPort, and SPort.
Buttons
¾ OK: Apply all the changes you’ve made and exit SDFR Setting window.
¾ Cancel: Cancel all the changes you’ve made and exit SDFR Setting window.
¾ Apply: Apply all the changes you’ve made without existing SDFR Setting window.
E-mail: [email protected]
Website: www.Xtramus.com
XTRAMUS TECHNOLOGIES ®