Xtramus NuTEA-551 V1.2 - Manual (Page 25)

25
4.2. Starting NuTEA-551 Utility Software & Demo Mode
Before starting NuTEA-551 utility software, please be sure that your NuTEA-551 is properly connected to
your PC. The figure down below is an example for connecting NuTEA-551 to PC via an USB cable.
↓
↓
Before connecting NuTEA-551 with your PC via a USB cable, please be
sure that NuTEA-551 should be in the most outer layer of its menu, which
displays only the model name (NuTEA-551) and its cumulative running
time.
When connected properly, NuTEA-551’s LCD screen will display a
message “USB Link Connected” as shown in the figures on the left hand.
You can start NuTEA-551 utility software by:
Starting NuTEA-551 Utility Software
¾ Double-click NuTEA-551 utility icon
located on your PC’s desktop
¾ Click Start Æ Programs Æ NuStreams
Æ NuTEA-500 Utility Æ NuTEA-551
Utility.
If your PC is not connected with NuTEA-551, you can still run NuTEA-551 utility software under Demo
Mode. Almost all functions are available under Demo Mode. However, please note that Demo Mode is
for system demo purposes only, and does not serve any testing purposes at all.
E-mail: [email protected]
Website: www.Xtramus.com
XTRAMUS TECHNOLOGIES ®