Xtramus NuTEA-551 V1.2 - Manual (Page 41)

41
5.4.4. Filter Setting
Parameter Settings – Filter Setting
SDFR Overview
SDFR (Self-Discover Filtering Rules) is a technology that makes packet capturing/filtering over Ethernet
easy and convenient. Each filter is independent and can be activated in any combinations.
All SDFR you’ve set can be view in the Current Filter field. Also, you can view parameters and values for
these SDFR in the Filter Values field, as shown in the figure above.
To access SDFR settings, please choose On in the SDFR field, and click the Settings button located on
the right side as shown in the figure down below.
A SDFR Setting window will pop up, allowing you to configure SDFR. Please refer to the section down
below for more detail information regarding to SDFR configurations.
To apply all the changes you made here and save these settings to NuTEA-551, please click the Apply
button located in the lower-right part of Filter Setting page.
E-mail: [email protected]
Website: www.Xtramus.com
XTRAMUS TECHNOLOGIES ®