Xtramus NuTEA-551 V1.2 - Manual (Page 37)

37
5.4.1. Impairment Parameters
Parameter Settings – Impairment Parameters
CRC Error
You can enable CRC Error impairment and set its parameters here.
¾ Enable: Click the Enable check box to enable NuTEA-551’s CRC Error impairment.
¾ CRC Error Percentage (%): You can set the percentage of packets with CRC Error here in this field.
The range of the CRC Error Percentage (%) is from 0.00001% to 50%.
Packet Corruption
You can enable Packet Corruption impairment and set its parameters here.
¾ Enable: Click the Enable check box to enable NuTEA-551’s Packet Corruption impairment.
¾ Corruption Percentage (%): You can set the percentage of packets with Packet Corruption here in
this field. The range of the Corruption Percentage (%) is from 0.00001% to 50%.
Packet Drop
You can enable Packet Drop impairment and set its parameters here.
¾ Enable: Click the Enable check box to enable NuTEA-551’s Packet Drop impairment.
¾ Drop Percentage (%): You can set the percentage of packets with Packet Drop here in this field. The
range of the Drop Percentage (%) is from 0.00001% to 50%.
¾ Available when Rate > X%: If enabled, Packet Drop impairment will be triggered when the line rate
reach the set percentage.
¾ Rate (%): You can set the triggering line rate here in this field. The range of the Rate (%) is from 1% to
100%.
Packet Reorder
You can enable Packet Reorder impairment and set its parameters here.
¾ Enable: Click the Enable check box to enable NuTEA-551’s Packet Reorder impairment.
¾ Reorder Percentage (%): You can set the percentage of packets with Packet Reorder here in this
field. The range of the reorder Percentage (%) is from 0.00001% to 50%.
E-mail: [email protected]
Website: www.Xtramus.com
XTRAMUS TECHNOLOGIES ®