Vectronics VEC-1292K - Manual (Page 16)

VEC-1292K Owner’s Manual Stereo Transmitter Kit
16
OPERATING INSTRUCTIONS
Once your VEC-1292K is set up, its operation is relatively simple. A typical set-
up is illustrated below:
CD Player
VEC-1292
Power
Antenna
Audio
Connections
Power: Press the unit's power switch "in" to activate the transmitter. Press to
the "out" position to turn the transmitter off. Always check the switch before
storing to ensure that the unit wasn't inadvertently left "on".
Audio Connections: Accepts standard RCA type stereo patch cords.
Audio Levels: Accepts industry-standard accessory audio levels (100 mVrms to
1 Vrms).
Antenna: Extend, only as needed, to provide adequate reception. The antenna
need not be extended fully for the unit to operate.
Battery: Use a 9V flat-pack alkaline-type battery. Check periodically for
battery condition.
Frequency: To change operating frequency or adjust modulation level, refer to
the Testing and Alignment section of this manual for detailed instructions.
Sudden changes in temperature or excessive heating of the case may cause a shift
in the transmitter operating frequency. To avoid excessive frequency drift, avoid
operating in direct sunlight. Also, avoid operation on local in-use FM broadcast
channels, as your transmitter may cause "harmful interference" to normal
reception in violation of FCC rules.