Pointmaker CPN-5000 - Manual (Page 70)

Page 64 - Pointmaker CPN-5000 Color Video Marker Boeckeler Instruments, Inc.
Preparing the CPN-5000 for Use Section Three:CPN-5000 Menu System
This is usually 515.
6. Exit this dialog by selecting Previous Menu.
The next time you give the Print command, it will use these settings.
Multipoint
The Pointmaker Multipoint© feature gives multiple Pointmaker users the abil ity
to interactively mark over a common image. It utilizes the TCP/IP protocol
common to the Internet, in effect allowing the participants to be anywhere in the
world.
PVI-Server Requirements
A computer running the PVI-Server software is required to coordinate meet ings
with multiple Pointmaker units. There are versions for Windows 2000/XP or
Linux currently available. The CD containing the software is available upon
request. As an alternative, you are also welcome to use a Boeckeler sponsored
server, which is set up on the internet.
Configure the Network Settings
The following steps are required to allow the unit to communicate with other
Pointmakers over a TCP/IP network.
1. Activate the menu system (see Activating the Menu, on page 27).
The Main Menu appears (see Figure 3-1: Main Menu, on page 28).
2. Select the NETWORK option.
The Network Menu appears (see Figure 3-31: Network Menu, on page 62).
3. Select the Multipoint option.