Check out procedures – Paxton Superchargers Mustang Cobra, NOVI 1000 System User Manual
Page 29
P/N: 4809640
©2006 Paxton Automotive
All Rights Reserved, Intl. Copr. Secured
03APR06 v1.0 01Cobra(4809640v1.0)
1
9.
CHECK OUT PROCEDURES
A.
Inspect all wiring harnesses and electrical
connections . Make sure that all items are
properly routed, connected and secured .
B.
Check all hoses, lines, and fittings for proper-
ly secured connections . .
C.
Make certain all fasteners, brackets, and
clamps are installed and properly tightened .
D.
Check serpentine accessory belt and super-
charger drive belts for proper tension and
alignment .
E.
Cycle ignition key from “off” to the “on”
position .
F.
Check the entire fuel system for possible
leaks .
G.
Start engine and verify that the oil pressure is
within normal range .
H.
Allow the engine to come up to normal oper-
ating temperature .
I.
Check the coolant level in the coolant recov-
ery bottle and top off as needed .
J.
Check the following:
•
Fluid Leaks
•
Fluid Levels
•
Belt Slippage
•
Throttle Response
Section 9
CHECK OuT PROCEDuRES