Paxton Superchargers Mustang Cobra, NOVI 1000 System User Manual

Page 24

P/N: 4809640

03APR06 v1.0 01Cobra(4809640v1.0)

Attach the other end of the bypass valve

assembly to the fitting on the discharge tube .

Tighten the bypass valve assembly clamps .

(See Fig. 1-e .)

Install the inlet tube to the flex hose and

attach the other end to the supercharger .

Attach the bypass hose to the inlet tube and

secure with the Paxton-supplied hose clamp

(See Fig. 1-f .)

Adjust for the best fit and tighten all hose

clamps . Remove the rubber hose from the

crankcase evac plastic barb fitting located on

the passenger side valve cover . Attach the

supplied hose to the plastic barb fitting and

route the hose forward to the 90 degree brass

fitting on the plastic inlet tube . The super-

charger assembly is completed . (See Fig. 1-g .)

Fig. 1-e

Fig. 1-f

Fig. 1-g