Engine control computer removal & modifications – Paxton Superchargers Mustang Cobra, NOVI 1000 System User Manual

Page 25

P/N: 4809640

03APR06 v1.0 01Cobra(4809640v1.0)

Fig. 7-a

Fig. 7-b

Fig. 7-c

Fig. 7-d

*** NOTE ***

before beginning this process, retrieve the com-

puter control code from the passenger side door

panel. (See Fig. 7-a.) Follow the instructions on the

Chip Voucher to receive a pre-programmed com-

puter chip from PAXTON Automotive.

Remove the passenger side door sill plate, fol-

lowed by the passenger side kick panel . This

will reveal the engine control computer and its

harnesses . The harnesses are secured using

clips, which are attached to a small metal

bracket . Pull the harnesses off the bracket,

then remove the two 7/32" bolts that secure

the bracket itself . Remove the bracket . (See

Fig. 7-b .)

Pull the harnesses down and out of the way,

creating unobstructed access to the computer .

Remove the 7/32" screw that secures the

retention strap (arrow, See Fig. 7-c) and pull

the computer out of the foot well . (See

Fig. 7-d .)

Section 7

ENGINE CONTROl COMPuTER REMOVAl & MODIFICATIONS

ENGINE CONTROL COMPUTER

REMOVAL & MODIFICATIONS