Cooling system modifications – Paxton Superchargers Mustang Cobra, NOVI 1000 System User Manual

Page 19

P/N: 4809640

03APR06 v1.0 01Cobra(4809640v1.0)

Section 4

COOlING SYSTEM MODIFICATIONS

SPACER STANDS

COOLING SYSTEM

MODIFICATIONS

These modifications are necessary in order to

allow clearance for the supercharger .

The supplied Coolant Transfer Manifold

(CTM) is taller than the original, providing

necessary clearance for the supercharger . To

mount the new CTM, trim the two mounting

stud bolts to 3/4", and thread the supplied alu-

minum spacer stands (Fig. 4-a, arrows) ('96

-'98 model shown) into place on the driver’s

side to properly locate the CTM . Remove the

original coolant temperature sensors from the

old CTM and install in the new unit . Install

the CTM and secure with the supplied fasten-

ers .

*** NOTE ***

Some kits may be supplied with a CTM that

appears differently than the unit shown. both

CTM’s mount in the same manner.

Fig. 4-a

Fig. 4-b

Fig. 4-c

Install the straight portion of the Y tube into

the lower radiator hose, and orient the angled

portion towards the passenger side of the car .

(See Fig. 4-b .) Install the supplied upper radi-

ator hose and attach to the angled portion of

the Y tube . Install the upper portion of the Y

tube into the CTM . (See Fig. 4-c .)