Paxton Superchargers Mustang Cobra, NOVI 1000 System User Manual

Page 13

P/N: 4809640

03APR06 v1.0 01Cobra(4809640v1.0)

Fig. 2-j

Fig. 2-k

Fig. 2-l

Fig. 2-m

Using a 3/8" ratchet or breaker bar, rotate the

belt tensioner clockwise then remove and dis-

card the drive belt . (See Fig. 2-k .)

Remove the 10mm nut and the 13mm bolt/

stud which attaches the A/C bracket to the

front of the engine . (See Fig. 2-l .)

Remove the water pump pulley, followed by

the idler pulley (see Fig. 2-m), which will be

re-installed in a later step .

Loosen but do not remove the four bolts

securing the water pump pulley . (See Fig.

Remove the three 13mm bolts from the front

cover, the water pump bolt, and the alternator

bolt . (See Fig. 2-n .) Replace the top-most bolt

and the water pump bolt with the supplied low

profile bolts . The remaining holes will be used

as attachment points for the idler support

bracket .

lOW PROFIlE

bOlTS

Fig. 2-n