Paxton Superchargers Mustang Cobra, NOVI 1000 System User Manual
Page 17
P/N: 4809640
©2006 Paxton Automotive
All Rights Reserved, Intl. Copr. Secured
03APR06 v1.0 01Cobra(4809640v1.0)
3
H.
Refer again to Appendix “C” for assembly of
the main S/C bracket . Install it as shown . (See
Figs. 3-i, 3-j.) The belt is shown looped
around the alternator for clarity . Reinstall the
A/C line bracket using supplied hardware and
spacer .
I.
Insert bolts into the bracket from the back .
Attach the supercharger oil drain line to the
fitting at the bottom of the supercharger, and
lower the supercharger into place on the
bracket while inserting the drive pulley
through the loop in the belt . Bolt the super-
charger onto the main bracket using the sup-
plied fasteners, as shown . (Fig 3-k) (‘96-’98
models shown) The lower bolts are easier to
tighten from underneath the vehicle . The belt
can now be permanently installed .
Fig. 3-i
Fig. 3-j
Fig. 3-k
A/C bRKT
& SPACER