Paxton Superchargers Mustang Cobra, NOVI 1000 System - Manual (Page 11)

P/N: 4809640
©2006 Paxton Automotive
All Rights Reserved, Intl. Copr. Secured
03APR06 v1.0 01Cobra(4809640v1.0)
1
2. PREPARING YOUR VEHICLE.
A. Remove the upper and lower radiator hoses
from the Coolant Transfer Manifold (CTM) .
Remove the two 10mm bolts that secure the
CTM and remove it from the engine (it is
press fit, sealed with O-Rings, so it may take
some wiggling to remove) . (See Figs. 2-a,
2-b .)
Fig. 2-a
Fig. 2-b
Section 2
DISASSEMblY
B. Using a 10mm socket, remove the three bolts
which attach the coolant reservoir to the
frame . Set the reservoir aside . (See Fig. 2-c .)
C. Unplug and remove the cooling fan resistor
from the fan shroud . Disconnect the cooling
fan wiring harness . (See Fig. 2-d .)
Fig. 2-c
Fig. 2-d