NEXCOM VTC 1010 - Manual (Page 96)

Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. 82
Appendix F: OBDII Module Setup and Command
VTC 1010 User Manual
#35 D3
#36 D4
#37
|
#38
The distance which can be traveled by the vehicle before the next
service inspection is required
SERV=(V2*256+V1)*5-160635 (KM)
#37 V1
#38 V2
#39
B7 B6 B5 B4 B3 B2 B1 B0
Vehicle
motion(B7,B6):
00 = Vehicle
motion not
detected
01 = vehicle
motion detected
Driv. 2 working stat
state (B5,B4,B3)
°
G
000 = Rest
001 = Driver available
010 = Work
011 = Drive
110 = Error
111 = not available
Driv. 1 working state
(B2,B1,B0):
000 = Rest
001 = Driver available
010 = Work
011 = Drive
110 = Error
111 = not avaiable
#40
B7 B6 B5 B4 B3 B2 B1 B0
Vehicle Overspeed Driver 1 card Driver 1 time related state
Vehicle Over speed (B7,B6)
°
GIndicates whether the vehicle is
exceeding the legal speed limit set in the tachograph.
00 = No over speed
01 = Over speed Driver 1 card (B5,B4)
00 = Card not present
01 = Card present
Driver 1 time related state (B3,B2,B1,B0)
°
GIndicates if the driver
approaches or exceeds working time limits (or other limits).
0000 = normal
0001 = 15 min bef. 4.5 h
0010 = 4.5 h reached
0011 = 15 min bef. 9 h
0100 = 9 h reached
0101 = 15 min bef. 16 h
0110 = 16h reached
1110 = Error
1111 = not available
#41
B7 B6 B5 B4 B3 B2 B1 B0
NOT USED
Driver 2 card (B5,B4)
00 = Card not
present
01= Card present
Driver 2 time related state (B3,B2,B1,B0)
°
GIndicates if the driver approaches or
exceeds working time limits (or other limits).
0000 = normal
0001 = 15 min bef. 4.5 h
0010 = 4.5 h reached
0011 = 15 min bef. 9 h
0100 = 9 h reached
0101 = 15 min bef. 16 h
0110 = 16h reached
1110 = Error
1111 = not available
#42
B7 B6 B5 B4 B3 B2 B1 B0
Direction indicator
Tachgraph
performance Handling
information
System event
Direction indicator (B7,B6)
°
G
00 = Forward
01 = Reverse Tachgraph performance (B5,B4)
00 = Normal performance
01 = Performance analysis Handling information (B3,B2)
00 = no handling information
01 = handling information System event (B1,B0)
00 = no tachogr. Event
01 = tachogr. Event
#43
|
#44
Tachogr. vehicle speed 1/256 km/h Bit gain
Speed= ((VS2*256)+VS1)/256
#43 VS1
#44 VS2