Installing the second wwan module – NEXCOM VTC 1010 User Manual

Page 54

Text mode
Original mode

Chapter 5: System Setup

VTC 1010 User Manual

Installing the Second WWAN Module

1. The Mini PCI Express slot (CN8) shown below is used to install a WWAN

communication module such as GPRS, UMTS or HSDPA module. This
WWAN module is paired with SIM socket 2.

2. Insert the module into the Mini PCI Express slot at a 45 degrees angle

until the gold-plated connector on the edge of the module completely
disappears inside the slot. Then fasten screws into the mounting holes
to secure the module.