NEXCOM VTC 1010 - Manual (Page 33)

Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. 19
Chapter 3: Jumpers and Switches
VTC 1010 User Manual
VTC 1010 Jumper and Switch Settings
CMOS Clear Switch
Connector location: SW2
O N
1 2
O N
1 2
On Off
SW2.1 Clear CMOS Normal
SW2.2 Clear ME Normal
3.3V 3.6V
SW6.1 Off On
SW6.2 Off On
Default Settings: Default Settings:
SW2.1 Off
SW2.2 Off
SW6.1 Off
SW6.2 Off
Voltage Selector (For CN10 Connector)
Connector location: SW6
Note: Once CMOS is cleared and the power connector is plugged in, VTC 1010 will power on and
power off automatically in the first Power-On. After first Power-On, VTC 1010 will work normally.