4 wdt setting 1.5 3g module, 4 wdt setting, 5 3g module – NEXCOM VTC 1010 User Manual

Page 63

Appendix A: Software Demo Utility for I/O Ports of Function Control

VTC 1010 User Manual

1.3.3 Even Button Read

Shows the status of the Event Button.

1.3.4 GPIO LED

Sets the On/Off of the GPIO LED on front panel.

1.4 WDT Setting

Enables or disables the WDT function. There are 9 selections of time. The
timer of WDT can also be cleared by button.

1.5 3G Module

Enables or disables the WWAN function. SIM card 1 or SIM card 2 can also
be selected for the WWAN module.