Appendix e: vehicle power management setup, External power output setting, Startup and shutdown voltage setting – NEXCOM VTC 1010 User Manual

Page 83

Appendix E: Vehicle Power Management Setup

VTC 1010 User Manual

Appendix E: Vehicle Power Management Setup

External Power Output Setting

VTC 1010 has four modes for external power output setting.
1. External +12V and By Pass Car Battery Turn On Simultaneously
2. External +12V and By Pass Car Battery Turn Off Simultaneously
3. External +12V Turn On Only
4. By Pass Car Battery Turn On Only

Advanced

→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit

External +12V & By Pass Car
Battery Power Setting

Power Management Configuration

** External +12V & By Pass Car Battery Setting **

External Power

** External +12V & By Pass Car Battery Setting **

Input Voltage

Startup.Shutdown

**Delay Time Setting**

Power On Delay

Power Off Delay

[Turn On Both]

9-36V

[(11.5.10.5)/(23,21)]

External Power

Turn On Booth

Turn Off Booth

Turn On +12V

Turn On By Pass Car Battery

Startup and Shutdown Voltage Setting

Set the startup voltage to 11.5V or 23V and the shutdown voltage to 10.5V or 21V
If the input voltage is 12V: the startup voltage to 11.5V and the shutdown
voltage to 10.5V.
If the input voltage is 24V: the startup voltage to 23V and the shutdown
voltage to 21V.

Advanced

→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit

Startup,Shutdown Setting

Power Management Configuration

** External +12V & By Pass Car Battery Setting **

External Power

** External +12V & By Pass Car Battery Setting **

Input Voltage

Startup.Shutdown

**Delay Time Setting**

Power On Delay

Power Off Delay

[Turn On Both]

9-36V

[(11.5.10.5)/(23,21)]

Startup,Shutdown

(11.5, 10.5) / (23,21)

(12.0, 11.0) / (24,22)

(12.5, 11.5) / (25,23)

(12.5, 11.0) / (25,22)