NEXCOM VTC 1010 - Manual (Page 20)

Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. 6
Chapter 2: External Connectors Pinout Description
VTC 1010 User Manual
Chapter 2: External Connectors Pinout Description
LED Indicators (PWR, Status, LAN & GPIO)
Connector Number: 1
LED LED Behavior
LED1 (GPIO)
Off (Default)
Green: On. Programmable by user.
LED2 (LAN)
Green: Link
Blinking: Active
LED3 (HEALTH)
Steady Green: System ready
Steady Red: System booting
LED4 (POWER)
Blue: Power good
Red: Power failure
LED Indicators (SSD, GPS, WLAN & WWAN)
Connector Number: 2
LED LED Behavior
LED1 (WWAN) Green: WWAN On
LED2 (WLAN) Green: WLAN Connected. Off: Disconnected
LED3 (GPS) Green: GPS power On
LED4 (SSD) Green: Storage access
LED1 LED1
LED2 LED2
LED3 LED3
LED4 LED4