NEXCOM NEX 732L2G - Manual (Page 8)

7 Chapter 1 NEX732L2G User Manual
Chipset
Intel® 875P/6300 ESB Chipsets
Firmware Hub (FWH) 4M bits flash ROM x1
PCI V2.2 compliant
Onboard LAN
Intel® 82551QM 10/100 Ethernet controller x 1 (co-layout with Intel® 82541GI Gigabit Ethernet
controller)
Optional Intel® 82547GI Gigabit Ethernet controller x1 (dedicated by CSA port directly from the ƒÞ
Intel® 875P )
Compliant with PCI V2.1/2.2. IEEE 802.3, IEEE 802.3u, IEEE 802.3x, IEEE 802.3ab
Drivers support: Windows® XP/2000/ME, Linux
RJ45 with LED connecter x 2
4 x pin header for extended LAN (With LED)
Onboard I/O
Winbond W83627HF super I/O on board on boar
SIO x 4, DB9 x 2, 10-pin header x 2,
PIO x 1, Bi-directional, EPP/ECP support, DB25 x 1
Floppy Disk controller: 3.5” 1.44MB/2.88MB support, 34 pin connector
× 1
On chip enhanced IDE
× 2, PIO up to mode 4, Ultra ATA33/66/100 support, total 4 E.IDE Devices
support, 40 pin connector
× 2
PS/2 keyboard/mouse Mini-Din connector x 2
GPIO (4 in 4 out) Pin Header
On board USB 2.0 port
× 4
On board buzzer
× 1
2-pin power on button switch
On board 4 pin header for SM bus ( I 2 C)
On board 2 pin header for reset SW, 4 pin for speaker, 5 pin for keylock and power LED, 2-pin for IDE
HDD LED
SATA connector x 2; data transfer bandwidth up to 150MB/s, RAID 0&1 supported for 2HDD.
Optional NS87431 IPMI Controller (optional feature by request and min. order q’ty required)
Onboard Audio
Support 5.1 channel audio codec with ALC655 (AC’97 codec)
Phone Jack: Line in x 1, Lin out x 1, Mic in x 1
Pin Header: Video-in x 1, CD-in x 1, Aux-in x 1