18 exit without saving, 17 save & exit setup – NEXCOM NEX 732L2G User Manual

Page 55

Chapter 4

NEX732L2G User Manual

4.18 Exit Without Saving

Selecting this option and pressing <Enter> will exit the Setup utility without recording any new values or

changing old ones.

This concludes Chapter 4. The next chapter covers drivers installing.

4.17 Save & Exit Setup

Selecting this option and pressing <Enter> will save the new setting information in the CMOS memory and

continue with the booting process.

Note: If you forget your password, the only way to solve this problem is to discharge the CMOS memory by

turning power off and placing a shunt (jumper cap) on jumper JP11 to short pin 2 and pin 3 for five seconds,

then putting the shunt back to pin 1 and pin 2 of JP11.