beautypg.com

NEXCOM NEX 732L2G User Manual

Page 70

background image

69

Appendix C

NEX732L2G User Manual

C.1 Reflash BIOS Procedure (N732T00B.bin)

Instructions for the flash BIOS are as follows:

1. Prepare a flash floppy disk

Using DOS O/S format, a boot disk with file command.com only, no himem.sys or other memory manager

devices loaded during flash procedure, copy the attached flash utility and the “.bin” BIOS file to the boot

disk.

2. Flash BIOS Procedure

Boot from the flash disk and type the following command line under A prompt

A:>af826 N732T00B.bin/sn/py/cd/cp/cc/F

Hit “Enter” to flash the BIOS

3. After Flash BIOS

Hit “Delete” to get into the BIOS and load the optimized default setting. Change any setting you want, and

then “Save” and “Exit”.

See also other documents in the category NEXCOM Hardware: