NEXCOM NEX 732L2G - Manual (Page 49)

48 Chapter 4 NEX732L2G User Manual
4.11 Power Management Setup
This option lets you control system power management. The system has various power-saving modes
including powering down the hard disk, turning off the video, suspending to RAM, and software power
down that allows the system to be automatically resumed by certain events.
The power-saving modes can be controlled by timeouts. If the system is inactive for a time, the timeouts
begin counting. If the inactivity continues so that the timeout period elapses, the system enters a power-
saving mode. If any item in the list of Reload Global Timer Events is enabled, then any activity on that item
will reset the timeout counters to zero.
If the system is suspended or has been powered down by software, it can be resumed by a wake up call that
is generated by incoming traffic to a modem, a LAN card, a PCI card, or a fixed alarm on the system real-
time clock.
Selecting Power Management Setup on the main program screen displays this menu:
Figure 4-8: BIOS – Power Management Setup
PWRON After PWR-Fail
This setting specifies whether your system reboots after a power failure.
There are three selections:
Off: The system will remain off when power comes back after a power failure.
On: The system will switch on when power comes back after a power failure.