Dan Dugan Sound Design M - Manual (Page 25)

Dugan Model M User Guide Connecting to a Computer
25
Setting a Specific IP Address
Users with IT expertise can set a specific IP address for any Dugan unit on the net-
work. Operating the real-time Dugan Control Panel requires that the Dugan unit and
computer be on the same subnet.
1. Launch Dugan-Utility-vxx.jar.
Figure 4-2 Dugan Utility
2. Wait a minute and if the list pane is blank, click Refresh List.
If the list pane remains blank, skip back to Manually Add Unit above.
If the list pane displays Dugan units, continue.
3. Click on the first unit in the list so it is highlighted.
The Network Parameters section displays information about that unit.
4. If Use DHCP is selected, de-select it.
5. Enter the desired IP address into the IP Address field.
6. Click Send New Params to Unit.
The Model M will reboot.
7. Click Refresh List to confirm the settings.
8. Repeat from step 3 to set IP addresses for additional units.