Dan Dugan Sound Design M User Manual

Page 23

Dugan Model M User Guide

Connecting to a Computer

5. Select the Use DHCP parameter.

6. Click Send New Params to Unit.

7. Click Refresh List.

8. Highlight the unit in the list pane again.

If Unit Reachable is YES, this unit is ready to use with the Dugan Control Panel. If
you have additional Dugan units to connect, select the next unit in the list and
repeat Step 4. If you are finished with installation, proceed to Chapter 4: Dugan
Control Panel.

If Unit Reachable is NO, proceed to the next step.

9. De-select the Use DHCP parameter.

10.Copy This Computer’s IP Address to the IP Address field, and increase the value in

the last (fourth) group by one.

For example, if This Computer’s IP Address is 192.168.1.101, set IP Address to
192.168.1.102.

11.Click Send New Params to Unit.

12.Click Refresh List.

13.Highlight the unit in the list pane again.