Dan Dugan Sound Design M - Manual (Page 24)

Dugan Model M User Guide
24
Manually Add Unit
If the Dugan unit does not appear in the Dugan Utility list pane, you can manually
add the unit. First you need to know the IP address of the unit.
To determine the IP address:
1. On the front panel, select MENU by pressing the up and left navigation arrows.
2. Press ENTER.
The MENU screen appears.
3. Select Network Configuration by pressing the up and down navigation arrows.
4. Press ENTER.
The Network Configuration screen appears.
5. Note the IP Address.
To manually add the unit:
1. In the Dugan Utility, click Manually Add Unit.
2. Enter the IP address from the Network Configuration screen.
3. Click OK to exit the dialog.
4. Click Refresh List.