Dialogue Tech Flybook 3G Notebook PC - Manual (Page 70)

70
CDMA communication (Optional)
The CDMA module in your computer is CDMA2000 compliant. The procedure of configuring and
making a connection is the same used for GPRS communication. Please refer to the GPRS
section.
DIAL-UP LINK THROUGH THE BUILT-IN MODEM
Configuring your connection
In Networks window, select Create a new connection to create a dial-up connection. If
completed, a dial-up entry will show in Networks window.
Making a dial-up link
Please follow the steps below to make a dial-up link (If a dial-up connection, named Dial-up, is
created.):
1. Connect the modem to a phone line (from the MODEM port to a telephone jack).
2. Click on [Dial-up] in Networks window to invoke Dial-up Link dialogue box.
3. Input dial-up phone number, user name and password of your account.
4. Click on [Dial] to start the connection.
If connected, click on [Dial-up] once again in Networks window. A connection status window
appears this time. In the status window, you can:
• Check connection status.
• Stop the connection.
PC CARD CONNECTION
Windows integrates the function “plug-and-play” for the PC card connection. If a card is
inserted in the PC card slot and Windows cannot find the driver, Windows will guide you to the
installation of the driver. For some device cards, specific application programs are required. See
the manufacturer’s instructions.