Dialogue Tech Flybook 3G Notebook PC - Manual (Page 68)

68
GPRS COMMUNICATION
To use the GPRS module, it is necessary to have a SIM card. This will
permit you to connect with Internet and to check your e-mail. Insert the
SIM card into the SIM card slot before activating the module.
Configuring your connection
1. Once the module is activated with the SIM card, the system will ask
the PIN code (if present), digit the code and then press Enter.
2. Click on the [Advanced] option and then input an initialization command in the Extra
initialization commands window.
3. Click on [Ok] to close the window.
NOTE
The Extra initialization command is different from network to network. Request the
command from your network service provider.
• In Network Connections window, run Create a Connections window to create a dial-up con-
nection for GPRS. If completed, an access option to the Network Connections will appear.