Hydrosport ™ exercise bars, Installing the stationary exercise bars, Hydrosport ™ aquatic fitness bar – Dimension One Spas Aquatic Fitness System User Manual
Page 24

Dimension One Spas - Aquatic Fitness System - Owner’s Manual
22
HydroSport
™ Exercise Bars
Installing the Stationary Exercise Bars
Exercise Locations
The AFS design contains multiple OptiMount™ locations for rapid installation of HydroSport
™
equipment in a variety of locations and combinations. 
 
Connecting the Exercise Bars
The Exercise Bars connect to the AFS 
OptiMounts
™ using Butterfly Tops. Push
the Butterfly Top screw through the hole in 
the end of the bar and screw it into the 
OptiMount
™. Repeat for the other end of
the bar. 
 
If two bars connect to the same 
OptiMount
™, line up the holes on the bars,
insert the Butterfly Top and connect to the 
OptiMount™. 
HydroSport
™ Aquatic Fitness Bar
Installing the Aquatic Fitness Bar
 
Snap one end of the tensor cord to the Butterfly Top. 
The other end of the cord snaps on one end of the 
Aquatic Fitness Bar. Repeat for the other end of the bar. 
The bar can connect to the same OptiMount™ because 
the design accomodates multiple pieces of gear. 
 
