CIRCUTOR AR5L Series - Manual (Page 45)

45
6.6.- Menu OFF: Enable / Disable Password.
In order to avoid an accidental manipulation of the analyzer, the analyzer can
be set to request for a password when the user wants to turn it off.
Password?
- With the key [ 4 4 4 4],[3 3 3 3] you can select:
- YES: A password is requested to turn the analyzer off.
- NO: No password is required to turn the analyzer off.
- [ENTER] to validate the choice or [ESC] to exit with no modification.
6.7.- Menu LANGUAGE
It allows to select the language in which the menus will be presented.
Language
English
- With keys [ 6 6 6 6] & [5 5 5 5] select the language.
- [ENTER] to confirm selected language
Press key [ESC] to exit with no modification.
NOTE: This configuration is commune for all the programs.
7.- ANALYZER COMMUNICATIONS
To connection to PC of the analyzer must be done through the power supplier
set, which will be necessary connected to the main. Perform the connection using the
two wires factory-delivered with the analyzer.
One cable will link the analyzer to the power supplier set, and another cable is
a standard RS232 connector.
When starting communication tasks take into account:
• Communication parameters of the analyzer and the PC must fully coincide.
• The power supplier set must be plugged into.
• The analyzer cannot be into the setup menu.
CIRCUTOR has a software package that permits the user to retrieve stored
data in the analyzer to PC for a further complete analysis.